With a low profile design and high lift capability, the Pittsburgh Automotive Low Profile 3 Ton floor jack is one of the best floor jacks for professionals and enthusiasts alike.

This post contains affiliate links.

As an Amazon Associate, Real Tool Talk may receive a commission from qualifying purchases.

Vehicles come in many different heights and sizes. And if you’re like me, then you probably own more than one vehicle. Which leads to the question, Do you have a floor jack that works for every type of vehicle you own or work on?

If your a professional automotive tech, then chances are you probably do. However, you might not have a suitable jack at home, or maybe you’re just a gear head that likes to work on your own vehicles and are looking for the right tools to get the job done.

Well whatever your situation is, the durability and versatility of a floor jack are important factors to consider before selecting the right jack for you.

That is why I want you to take a look at the Pittsburgh Automotive 3 Ton Low Profile Jack (Affiliate Link).  It offers both a low profile build and a high lift capability, so no matter what your vehicle is, you can bet this jack will work for you.

In this review, we will cover the specifications of the jack along with setup and maintenance procedures. Also, we will discuss frequently asked questions and what customers think of their purchase.

If you are looking for a specific bit of information, feel free to jump ahead with the Table of Contents. Otherwise, let’s take it from the top and hopefully help you decide if the Pittsburgh Automotive 3 Ton Low Profile Jack is right for you!


What to Expect, Specs!

  • Product Dimensions                          27-1/2 x 14-3/8 x 8-5/8 in.
  • Lift Capacity                                        3 Ton
  • Max Lift Height                                  19-5/8 inches
  • Minimum Height                               3-1/8 inches
  • Handle Length                                   45 inches
  • Product Weight                                  78 pounds

Watch as one customer un-boxes and setups up their Jack.

The build quality of the Pittsburgh Automotive 3 Ton floor jack makes is a perfect jack for both professional technicians and automotive enthusiast alike.

Made from industrial-grade steel, this jack is extremely durable and structurally sound. However, this also means that this jack will be heavier, compared to other jacks.

Extra-wide steel casters are included for added stability. And a universal joint release provides precise load control in any handle position.

This jack is also equipped with Rapid Pump Technology. Designed with a dual piston pump system, most loads can be lifted in as little as 3-1/2 pumps.

Lift Capacity – How much will this Jack Lift?

The Pittsburgh Automotive 3 Ton floor jack has a maximum lifting capacity of 3 tons, suitable for picking up SUVs, Trucks, and other heavy vehicles.

Its height capacity allows you to lift vehicles to a height of 19-5/8 inches. Which is more than enough to lift a vehicle and safely put jack stands underneath the frame.

The low profile design grants you the capability to get under even the lowest of sports cars, with a minimum height of 3-1/8 inch.

How big is it?

The Pittsburgh Automotive 3 Ton floor jack has a footprint of 27-1/2 inches long, 14-3/8 inches wide, and 8-5/8 tall. It also included a 45-inch handle.

The industrial strength steel that this jack is made allows for this jack to be able to lift up to 3 tons. However, it is also accountable for the jack weighing in at 78-pounds. So it probably won’t be as portable as some of it’s lighter competitors.

What People Want to Know – FAQs

After reading through several pages of Questions and Answers about the Pittsburgh Automotive 3 Ton Floor Jack, these were some of the most commonly asked questions.


What is the diameter of the saddle? 

The steel saddle is 4-1/4 inches in diameter. It also has a shoulder that stands about 1/4 tall. It appears to also be removable, so you can attach adapters, such as a transmission jack or door dolly attachment.

Is there any setup to be done before use?

There is some setup that will need to be done before use. It is important to check the fluid level in the pistons before using. This is very simple to do and step by step in the owner’s manual.

You will also have to assemble the handle and insert it into the handle socket at the back of the jack. It is held into place with a 17mm set screw bolt.

What maintenance will have to be done?

As with any piece of equipment, you should always check for damaged, loose, or missing parts before using the jack. But other than periodically greasing the lift arm, there is very little maintenance you will have to do.

It is recommended that the hydraulic oil in the pistons be changed every 3 years. W

Is there any warranty?

A 90-day limited warranty is included. However, proof of purchase is required and it only warrants the jack to be free of manufacturing and workmanship defects.

What are Users Saying?    

It’s pretty clear that people are impressed with this jack.  

Satisfied users note how durable and sturdy it is and that it makes for a great home shop jack.

Also, how the low profile design allows for the jack to be used on almost every car, all while being able to lift taller vehicles with its max height.  

Of course, there are always people that seem to have bad luck and get a jack that was assembled by someone having a bad day.

In a few rare cases, people reported the hydraulic cylinders leaking and over time no longer staying elevated with when weight was lifted. This is why it is always important to place the vehicle on jacks stands before working under any vehicle.

Others stated that when un-boxing their jack, they discovered parts missing or damaged.

Final Thoughts

The Pittsburgh Automotive 3 Ton Floor Jack is one of the few jacks in its category that is suitable for both low-profile and high rise vehicles.

With its Rapid Pump Technology and Universal Joint Release, you will not only be able to lift vehicles to the maximum height with fewer pumps, but also safely lower the vehicle with the handle in any position.

Because this jack is made from industrial-grade steel, it also comes with a hefty weight tag. So this jack might not be suitable for all automotive enthusiast. If that’s the case, I would recommend a lighter aluminum jack.

Overall, this jack is an excellent option for the price. If you are looking for a solidly built jack that will work for virtually any vehicle then I strongly recommend you look into the Pittsburgh Automotive 3 Ton Low Profile Jack. It will not disappoint!

Check out The Pittsburgh Automotive 3 Ton Floor Jack on Amazon!




Leave a Comment