This post contains affiliate links.
As a member of Amazon Associates, Real Tool Talk may receive a commission on qualifying purchases.
With the holidays fast approaching, you are probably searching for gift ideas for that “hard to buy for” DIYer in your life.
The good thing is, it doesn’t have to be that hard!
Take it from me, a DIYer in my own right, there are plenty of gifts that you can get that Mr. or Mrs. Fix-it on your list that they will find useful.
And the best part, you don’t have to spend big bucks to find that item if you don’t want to!
I have taken the liberty of assembling a list of the Top Gifts for the DIYer in Your Life. Whether you’re looking for woodworking, electrical, mechanic, power or hand tools, there is going to be something on this list the will suit your needs.
Let’s start by taking a look at DIY gifts under $25.
This pocket hole jig has a no-fence design, allowing you to position it in any position. This is particularly handy when making repairs on furniture or installed cabinetry, where a fenced jig wouldn’t work.
The Kreg Mini Jig comes with a stepped steel drill bit, depth collar, and an Allen wrench for making adjustments.
Great for commercial or residential applications, these titanium drill bits are perfect for drilling through wood and plastic materials. Available sizes include 1/16 to ½ inch and include a plastic carrying case.
A Titanium Coated pilot point tip allows for easier starts and increases bit life.
This kit is a must-have addition to anyone with an air compressor. It is a great starter kit for inflation and air tool connections.
- 5-50 PSI gauge
- Dual-foot air chuck
- (1) ¼ NPT coupler (F)
- (4) ¼ NPT plugs (M)
- (2) ¼ NPT plugs (F)
- (1) female coupling
- (2) male couplings
- (5) inflation nozzles
Made from one of the most trusted Brands in cutting tools and equipment, The Gerber Dime is
a mini multi-tool packed with 12 useful tools.
Small enough to fit on a key chain, the Dime will always have you prepared.
- Spring-loaded needle nose pliers, standard pliers, & wire cutters
- Bottle opener
- Fine edge blade
- Retail package opener
- Medium flat head driver & cross driver
- Coarse + fine file & lanyard ring
Akro-Mills is a leading manufacturer of storage, organization, transport and material handling products. Keeping your tools more organized saves time and money in lost tools.
Built from chemical resistant plastic will steel latches, you can confidently carry this toolbox from site to site without worry about the box coming open. And with the removable tray, you can optimize the storage capacity to fit your needs.
Another great product from Kreg, the Multi-Mark is a perfect way to mark and measure a variety of different types of products using just one tool. With 3 different scale configurations, a built-in level, and a reveal gauge you can measure and transfer to the material to cut with confidence.
The Kreg Multi-Mark is A convenient multi-purpose tool that should be on any professional or DIYers gift list.
Safety should be a major concern when doing DIY projects, especially when you are working with electrical outlets. That’s why having the proper equipment for the job is important.
Sherry Instruments Non-contact Voltage tester is just that.
It is always important to check for the presence of electricity before installing new outlets. And to check for proper installation when you are done. All of that is possible with the use of these two testers.
Slightly bigger than a pen, this battery-powered flashlight fits conveniently fits in your pocket and shines brightly with the 100 lumens LED bulb.
Built out of aluminum and Military grade anodized coating this penlight is extremely durable and will shed its light for a very long time.
This impact ready bit set is a must-have for any DIYer. Part of Dewalt’s Flexor accessory line-up, these bits will flex up to 15 degrees. This ensures that you will see fewer breakages and longer bit life.
- ⅜, ¼, & 5/16 hex bits
- Impact ready sleeve
- Impact ready lock holder
- 2” PH2, SQ2, T25, SL8 bits
- (4) 1” PH2
- (2) 1” SL8
- (1) 1” SL6, PH1, PH3, SL10, T15, T30, SQ3, SQ1
- (3) 1” PH2, T20, T25
- (2) 1“ SQ2
- (1) 3.5” PH2
It can also be used as a portable clamp, or solid mounted to a bench.
With a solid aluminum design and a sliding “T” handle, you will be able to make precise adjustments. This allows you to make a perfect joint, every time!